Adtech CNC9640 - Page 135

ADTECH9 Series CNC Maintenance Manual
- 130 -
Unit :
Authority : Operation admin
Default : 0
Effective time : Instant
Note : To set the IP address to access the remote Modbus slave when the system
is used as a Modbus master
079 Modbus master timeout (ms)
Range : 0~1000
Unit :
Authority : Operation admin
Default : 0
Effective time : Instant
Note : To set the communication timeout to access the remote Modbus slave
when the system is used as a Modbus master
080 Modbus master retransmission times
Range : 0~100
Unit :
Authority : Operation admin
Default : 10
Effective time : Instant
Note : To set the communication retransmission times to access the remote
Modbus slave when the system is used as a Modbus master
081 UART3 serial port baud rate
Range : 9600~115200
Unit :
Authority : Operation admin
Default : 115200
Effective time : Instant
Note : To set the communication baud rate of UART3 serial port (RS485)
082 Local IP address 2
Range :
Unit :