Adtech CNC9640 - Axis Parameter Configuration (P2.)

ADTECH9 Series CNC Maintenance Manual
- 131 -
Authority : Operation admin
Default : 0
Effective time : Instant
Note : To set the IP address of system Channel2 RJ45 network port
083 MAC address 2
Range :
Unit :
Authority : Operation admin
Default : 0
Effective time : Instant
Note : To set the physical MAC address of the Channel 2 RJ45 network port of
the system.
084 LV interrupt enable (0 off 1 on)
Range :
Unit :
Authority : Operation admin
Default : 1
Effective time : Restart
Note :
10.3 Axis parameter configuration (P2.)
001
X Gear Numerator
X Gear Denominator
Y Gear Numerator
Y Gear Denominator
Z Gear Numerator
Z Gear Denominator
A Gear Numerator
A Gear Denominator
B Gear Numerator