Adtech CNC9650 Programming Manual

ADTECH9 Series CNC Programming Manual
Fig. 9.1 Tool Compensation Processing Hole Example
N1 G91 G00 X120.0 Y80.0;…………………(1)
N2 G43 Z-32.0 H01;…………………………(2)
N3 G01 Z-21.0;………………………………(3)
N4 G04 P2000;………………………………(4)
N5 G00 Z21.0;………………………………(5)
N6 X30.0 Y-50.0;……………………………(6)
N7 G01 Z-41.0;………………………………(7)
N8 G00 Z41.0;……………………………(8)
N9 X50.0 Y30.0;……………… ……………(9)
N10 G01 Z-25.0;……………………………(10)
N11 G04 P2000;……………………………(11)
N12 G00 Z57.0 H00;………………………(12)
N13 X-200.0 Y-60.0;……………………(13)
N14 M30;
 Note:
When the offset No. is changed, it only changes to new offset, rather than adding the new offset to the old
offset.

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English