AFL FlexScan FS200 OTDR - Editing Save Fields (String and Number Editors)

• Job, OTDR End, Far End, and Cable elds are user-dened and may be set and/or edited in the String Editor screen:
– Touch the desired eld to display String Editor.
– Make edits using on-screen controls.
– Touching Done will save edits and return to the Save As screen.
– Touching Back or Cancel will return to the Save As screen with no edits saved.
• Link number auto-increments after each save, but can be modied in the Number Editor screen as needed.
– Touch the Link eld to display the Number Editor.
– Make edits using on-screen controls.
– Touching Done will save edits and return to the Save As screen.
– Touching Back or Cancel will return to the Save As screen with no edits saved.
35
Save As Screen
Number Editor
String Editor
Touch Results to select Internal memory
or USB (if present) and navigate to the
desired Job and Cable folder
O verview
Settings
SmartAuto
Expert
Real-Time
OLS/OPM
Inspection
Results
Reports