AGFA DR 100s - Patient Size

Patient Size
The size of the patient is classified in five categories: Extra Small, Small,
Medium, Large and Extra Large.
Press one of the buttons to select the desired patient size.
The patient size setting affects the mAs value.
The default values for adjusting mAs are listed in the following tables.
Depending on the configuration, the default behaviour can be overruled and
the parameters that are affected by the patient size and the actual variation
values can be defined specifically for each exam type.
Table 25: mAs variation over patient size
Patient size mAs
Extra Small normal mAs * 0.25
Small normal mAs * 0.5
Medium normal mAs
Large normal mAs * 2
Extra Large normal mAs * 4
Related Links
Dose adaptation guidance on page 112
128 | DR 100s | Software Console
0411D EN 20220627 1040