Positioning the DR detector
1. If a grid is used for the examination, attach the grid to the detector.
2. Wrap the DR detector in a protective plastic bag.
WARNING:
Liquids ingressing the DR Detector may cause malfunction
and contamination.
If there is a chance that the detector comes in contact with liquids (bodily
fluids, disinfectants,...), the DR Detector must be wrapped in a protective
plastic bag while performing the examination.
a) Position the DR Detector tilted forward in the front slot of the storage
bin.
b) Take a protective bag and slide it over the DR Detector.
3. Position the DR detector.
DR 100s | Basic Workflow | 87
0411D EN 20220627 1040
To Next Page
Loading...
