Connectivity
DR 100s requires a TCP/IP network to exchange information with a number of
other devices. The recommended minimum network performance is 100 Mbit
for wired ethernet and IEEE 802.11 g for wireless network.
Note: A wireless network operating on variable speed or subject to
interruptions will cause delays on the NX workstation.
DR 100s communicates with other devices in the hospital network using one
of the following protocols:
• DICOM
• IHE
DR 100s can be connected to a RIS system (input scheduling), a PACS system
(output image/data management) and to a hardcopy device (output image).
Topics:
• Connecting USB devices
• Connecting DR 100s to a wired network
162 | DR 100s | Product Information
0411D EN 20220627 1040
To Next Page
Loading...
