131
Part 3. Packed glass columns Columns and Traps
Overview: Installing glass packed columns
Part 3. Packed glass columns
Glass packed columns must be installed simultaneously at the inlet and the
detector and must be installed parallel to the oven door:
You can install glass packed columns directly in the purged-packed inlet, ECD,
and adaptable NPD, FID, and FPD fittings. The TCD requires an adapter.
There are three types of glass packed columns available. You must make certain
that your column is compatible with the inlet fitting and detector used. Table 16
summarizes the inlet and detector fittings required and the appropriate column
configuration.
Overview: Installing glass packed columns
1. See Table 16 for information on fittings and column configuration required.
2. Remove or install an adapter, if necessary (see page 128).
3. Follow the general procedure for installing glass columns on page 133.
Front to front
Back to back
To Next Page
Loading...
Need help?
General
