9
The 6890 Series Gas Chromatograph
Maintenance information
Maintenance information
Fuses and batteries
The GC requires fuses and batteries for proper operation. These should only be
accessed by Agilent service personnel.
Table 1 Mainboard Fuses and Batteries
Table 2 AC Board Fuses
Fuse designation Fuse rating and type
F1, F2, F3, F4 8A, 250 Vac, IEC 127 type f (non-time delay), glass body
Battery designation Battery rating and type
BT1 3-volt lithium battery, Panasonic BR3032
Fuse designation Line voltage Fuse rating and type
F1, F2 120 V 20 A, 250 Vac, IEC 127 type f (non-time delay), ceramic body
F1, F2 200 V - 240 V 15 A, 250 Vac, IEC type f (non-time delay), ceramic body
F3, F4 All 8 A, 250 Vac, IEC type f (non-time delay), glass body