Agilent Technologies 6890 GC User Manual

239
Part 1. Not Ready messages Messages
Table 25, continued
Status message Run log entry Comments
Inlet not ready messages
Gas saver Not ready:
Gas saver active
The inlet is in Gas Saver mode.
Press [Prep Run].
Front inlet purging Not ready:
F inlet purge
Inlet in split mode is purging.
Press [Prep Run]. See page 244.
Back inlet purging Not ready:
B inlet purge
Inlet in split mode is purging.
Press [Prep Run]. See page 244.
F inl pulse inactive Not ready:
F inlet pres pulse
Press [Prep Run].
B inl pulse inactive Not ready:
B inlet pres pulse
Press [Prep Run].
F inl VI flow idle Not ready:
F inlet VI flow
Press [Prep Run].
B inl VI flow idle Not ready:
B inlet VI flow
Press [Prep Run].
Need F inl Solv vent Not ready:
F inlet Solv. vent
Press [Prep Run].
Need B inl Solv vent Not ready:
B inlet Solv. vent
Press [Prep Run].
Valve not ready messages
24V pneu valve drive Not ready:
24V pneu valve drive
See page 243.
Multiposition valve Not ready:
Multiposition valve
See page 243.
Gas sampling valve 1 Not ready:
Gas sampling valve 1
See page 243.
Gas sampling valve 2 Not ready:
Gas sampling valve 2
See page 243.

Agilent Technologies 6890 GC Specifications

General

Brand	Agilent Technologies
Model	6890 GC
Category	Laboratory Equipment
Language	English