Agilent Technologies 6890 GC User Manual

257
Part 4. Fault messages Messages
Table 28, continued
Fault no. Status message Popup message Run log Comments
211 Analog out #2 Signal path test failed Not ready:
Analog out #2
212 F det electrometer Front detector
electrometer out of
specification
Not ready:
F det electrometer
213 B det electrometer Back detector
electrometer out of
specification
Not ready:
B det electrometer
214 Front det flame out Front detector flame out Not ready:
Front det flame out
See page 263.
215 Back det flame out Back detector flame out Not ready:
Back det flame out
See page 263.
216 F TCD filament open Front TCD filament open Not ready:
F TCD filament open
See page 263.
217 B TCD filament open Back TCD filament open Not ready:
B TCD filament open
See page 263.
218 F TCD filament short Front TCD filament
shorted
Not ready:
F TCD filament short
See page 264.
219 B TCD filament short Back TCD filament
shorted
Not ready:
B TCD filament short
See page 264.
220 Heater overcurrent Heater overcurrent.
Thermal shutdown.
221 Thermal shutdown Not ready: See page 264.
222 Oven temp too hot Oven thermal shutdown Not ready:
Thermal shutdown
See page 264.
223 Oven temp too cool Oven thermal shutdown Not ready:
Thermal shutdown
See page 264.
224 Oven temp sensor Oven thermal shutdown Not ready:
Thermal shutdown
See page 264.
225 F det temp too hot Front detector thermal
shutdown
Not ready:
Thermal shutdown
See page 264.

Agilent Technologies 6890 GC Specifications

General

Brand	Agilent Technologies
Model	6890 GC
Category	Laboratory Equipment
Language	English