Agilent Technologies 8712ET Programmer's Guide

11-12 Programmer’s Guide
SCPI Command Summary
SCPI Device Command Summary
Table 11-3 CALibration
1. For use with multiport test sets only.
2. Binary parameters accept the values of 1 (on) and 0 (off) in addition to ON and OFF.
SUBSYSTEM COMMANDS FORM DESCRIPTION
CALibration
:SELF:ALL
command
only
Initiates a SelfCal on all ports that were
calibrated during the Test Set Cal.
1
CALibration
:SELF:METHod
<ONEPort|TWOPort>
CHAR Selects the method of SelfCal: enhanced
response/1-port or 2-port.
CALibration
:SELF <ON|OFF|ONCE>
2
NR1
CHAR
Initiates a SelfCal on the currently
selected ports and selects Periodic
SelfCal (ON) or SelfCal Once (OFF or
ONCE).
1
CALibration
:SELF:TIMER <num>
NR1 Sets the time interval for automatic
SelfCals.
1
CALibration
:ZERO:AUTO <ON|OFF|ONCE>
2
NR1 Turns the broadband detector
autozeroing function on/off.

Agilent Technologies 8712ET Specifications

General

Brand	Agilent Technologies
Model	8712ET
Category	Measuring Instruments
Language	English