Agilent Technologies 8712ET

Programmer’s Guide 11-13
SCPI Command Summary
SCPI Device Command Summary
Table 11-4 CONFigure
1. For use with 8712ES and 8714ES only.
SUBSYSTEM COMMANDS FORM DESCRIPTION
CONFigure <string> STRING Configures the analyzer to measure a specific
device type and parameter (the
function) — choose from one of the following
strings:
'AMPLifier:TRANsmission'
'AMPLifier:REFLection'
'AMPLifier:TRANsmission:REVerse'
1
'AMPLifier:REFLection:REVerse'
1
'AMPLifier:POWer'
'FILTer:TRANsmission'
'FILTer:REFLection'
'BBANd:TRANsmission'
'BBANd:REFLection'
'BBANd:TRANsmission:REVerse'
1
'BBANd:REFLection:REVerse'
1
'MIXer:CLOSs'
'MIXer:GDEL'
'MIXer:REFLection'
'CABLe:TRANsmission'
'CABLe:REFLection'
'CABLe:FAULT'
'CABLe:SRL'
BEGIN