Agilent Technologies 8720E Series Programmer's Guide

Chapter 1 1-101
Alphabetical Command Reference
HOLD
HOLD
Syntax
HOLD; or HOLD?;
Description
Front Panel Equivalents
IDN?
Syntax
IDN?;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent.
Command Description Range Query Response
HOLD Puts the sweep trigger into hold mode. N/A
<0|1><
L
F
>
Command Hardkey Softkey
HOLD
Command Description Range Query Response
IDN? Query only. Outputs the identification string:
HEWLETT PACKARD,87NNEX,xxxxxxxxxx,X.XX
where 87NNEX is the model number of the
instrument, xxxxxxxxxx is theserialnumber of
the instrument, and X.XX is the firmware
revision of the instrument.
N/A See command description
Sweep Setup
HOLD

Agilent Technologies 8720E Series Specifications

General

Brand	Agilent Technologies
Model	8720E Series
Category	Measuring Instruments
Language	English