Agilent Technologies 8720E Series

Chapter 1 1-175
Alphabetical Command Reference
PORT
PORT
Syntax
PORT<1|2|A|B|R|T><num>[S]; or PORT<1|2|A|B|R|T>?;
Description
These commands set the port extension length for the indicated port or input.
Ports 1 and 2 refer to the test set ports.
Front Panel Equivalents
Command Description Range Query Response
PORT1 Port 1 ±10 seconds
<num><
L
F
>
PORT2 Port 2 ±10 seconds
<num><
L
F
>
PORTA Input A ±10 seconds
<num><
L
F
>
PORTB Input B ±10 seconds
<num><
L
F
>
PORTR Reflection Port ±10 seconds
<num><
L
F
>
PORTT Transmission Port ±10 seconds
<num><
L
F
>
Command Hardkey Softkey
PORT1
PORT2
PORTA
PORTB
PORTR
PORTT
Cal
EXTENSION PORT 1
Cal
EXTENSION PORT 2
Cal
EXTENSION INPUT A
Cal
EXTENSION INPUT B
Cal
EXTENSION REFL PORT
Cal
EXTENSION TRANS PORT