7-126 Chapter7
Programming Examples
Limit Line and Data Point Special Functions
Limit Line and Data Point Special Functions
The analyzer has special functions in the area of limit testing and in the detection of
min/max data points within limit segments. The information in this section will teach you
how to use these limit line and data point special functions. The following topics are
included:
• Overview
• Constants Used Throughout This Document
• Output Limit Test Pass/Fail Status Per Limit Segment
• Output Pass/Fail Status for All Segments
• Output Minimum and Maximum Point Per Limit Segment
• Output Minimum and Maximum Point For All Segments
• Output Data Per Point
• Output Data Per Range of Points
• Output Limit Pass/Fail by Channel
Overview
The limit line and data point special functions are available as remote commands only.
Each command is overviewed in Table 7-11.
To Next Page
Loading...
Need help?
General
