Chapter 1 1-71
Alphabetical Command Reference
ECALDONE
ECALDONE
Syntax
ECALDONE;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent
ECALERC
Syntax
ECALERC;
Description
Front Panel Equivalents
Command Description Range Query Response
ECALDONE This command is designed to be used in a
polling loop to determine if the ECal
operation is finished. The command
returns information immediately. The
integer “1” is returned if the ECal has
completed the calibration or returns the
integer “0” if the ECal is not finished.
N/A N/A
Command Description Range Query Response
ECALERC
1
1. For ES analyzers, S
11
/ S
21
enhanced response is performed. For ET analyzers, transmission / reflection
enhanced response is performed.
Performs an ECal forward enhanced
response calibration.
N/A N/A
Command Hardkey Softkey
ECALERC
ES models:
ET models:
Cal
To Next Page
Loading...
Need help?
General
