1-258 Chapter1
Alphabetical Command Reference
TAKE4
TAKE4
Syntax
TAKE4<ON|OFF>; or TAKE4?;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent.
TALKLIST
Syntax
TALKLIST; or TALKLIST?;
Description
Front Panel Equivalents
Command Description Range Query Response
TAKE4 Initiates a mode in which every
measurement cycle is characterized by
sweeping in both the forward and reverse
directions and collecting raw data for all
four S-parameters. The sweeping can
occur when a SWPSTART or SING command
is received or when the analyzer is in
continuous, number of groups, or external
trigger mode. See “Example 2G: Take4 —
Error Correction Processed on an External
PC” on page 7-48.
N/A
<0|1><
L
F
>
Command Description Range Query Response
TALKLIST Selects the talker listener mode. N/A
<0|1><
L
F
>
Command Hardkey Softkey
TALKLIST
Local
To Next Page
Loading...
Need help?
General
