Agilent Technologies 8720E Series Programmer's Guide

Chapter 1 1-207
Alphabetical Command Reference
RFLP
RFLP
Syntax
RFLP; or RFLP?;
NOTE This command only applies to ET models.
Description
Front Panel Equivalents
Command Description Range Query Response
RFLP
1
1. This command can also be used on ES models to set the measurement mode to “Refl:FWD S11.”
Sets the measurement mode to
“Reflection.” (See also “S11.”)
N/A
<0|1><
L
F
>
Command Hardkey Softkey
RFLP
Meas
REFLECTION

Agilent Technologies 8720E Series Specifications

General

Brand	Agilent Technologies
Model	8720E Series
Category	Measuring Instruments
Language	English