Chapter 1 1-251
Alphabetical Command Reference
STOP
STOP
Syntax
STOP<num>[HZ|DB]; or STOP?;
Description
Front Panel Equivalents
Command Description Range Query Response
STOP Sets the stop stimulus value. If a list
frequency segment is being edited, sets
the stop of the list segment.
stimulus range
1
1. For frequency or power sweeps, refer to “Preset State and Memory Allocation,” in your analyzer’s reference
guide. For CW time: 0 to 24 hours. For frequency sweep, transform on: ± 1/frequency step. For CW time sweep,
transform on: ±1/time step.
<num><
L
F
>
Command Hardkey Softkey
STOP N/A
Stop
Sweep Setup
To Next Page
Loading...
Need help?
General
