Agilent Technologies E4428C User Manual

144 Chapter 4
Basic Digital Operation
Using Waveform Markers
Setting Marker Polarity
Setting a negative marker polarity inverts the marker signal.
1. In the
Marker Utilities menu (page 134), press Marker Polarity.
2. Select the marker polarity as desired for each marker number.
As shown on page 142:
Positive Polarity: On marker points are high (≈3.3V).
Negative Polarity: On marker points are low (0V).
Default Marker Polarity = Positive
Set each marker polarity independently.
See Also: “Saving Marker Polarity and Routing Settings” on page 130.

Agilent Technologies E4428C Specifications

General

Brand	Agilent Technologies
Model	E4428C
Category	Inverter
Language	English