Chapter 4 197
Basic Digital Operation
Creating and Using Bit Files
Entering Bit Values
1. Refer to the following figure.
2. Enter the 32 bit values shown.
Bit data is entered into the table editor in 1-bit format. The current hexadecimal value of the binary data is
shown in the Hex Data column, and the cursor position (in hexadecimal) is shown in the Position
indicator.
Renaming and Saving a User File
In this example, you learn how to store a user file. If you have not created a user file, complete the steps in
the previous section, “Creating a User File” on page 195.
1. Press
More (1 of 2) > Rename > Editing Keys > Clear Text.
2. Enter a file name (for example, USER1) using the alpha keys and the numeric keypad.
3. Press
Enter.
The user file has now been renamed and stored to the Bit memory catalog with the name USER1.
Enter These Bit Values
Cursor
Hexadecimal Data
Position
Indicator
To Next Page
Loading...
Need help?
General
