Agilent Technologies E4428C User Manual

Chapter 3 67
Basic Operation
Creating and Applying User Flatness Correction
2. Press GPIB Listener Mode.
This presets the signal generator and returns it to GPIB listener mode. The signal generator can now
receive remote commands executed by a remote controller connected to the GPIB interface.
3. Recall your instrument state from the instrument state register.
For instructions, see “Recalling an Instrument State” on page 72.

Agilent Technologies E4428C Specifications

General

Brand	Agilent Technologies
Model	E4428C
Category	Inverter
Language	English