Assembly Replacement
Before You Replace an Assembly
2-2
Before You Replace an Assembly
CAUTION Many of the assemblies in this instrument are very susceptible to damage from electrostatic discharge (ESD).
Perform service procedures only at a static-safe workstation and wear a grounding strap.
Be sure to review the warning and caution statements described in Chapter 55, "Safety and Regulatory," on page 5-1, prior to
replacing an assembly in your signal generator.
After Replacing or Repairing an Assembly
After you have replaced or repaired an assembly, certain performance tests and adjustments may have to be performed. Please
refer to Chapter 54, "Post-Repair Procedures," on page 5-1, for the list of performance tests and adjustments required for each
assembly.
To Next Page
Loading...
Need help?
General
