Agilent Technologies PlateLoc User Manual

113
Appendix A: Integrating the PlateLoc into third-party systems
PlateLoc User Guide
SetSealingTempera
tureComplete
Description
This event occurs when the PlateLoc successfully modifies the desired
sealing temperature of the hot plate in the non-blocking mode. The new
desired sealing temperature is returned in the sealing_temperature
parameter.
Parameters
Returns
None
GetSealingTimeCom
plete
Description
This event occurs when the PlateLoc successfully retrieves the sealing
time. The sealing time is returned in the sealing_time parameter in the
non-blocking mode.
Parameters
Returns
None
SetSealingTimeCom
plete
Description
This event occurs when the PlateLoc successfully modifies the desired
sealing time in the non-blocking mode. The new desired sealing time is
returned in the sealing_time parameter.
Parameters
Returns
None
Name Type
sealing_temperature SHORT
Name Type
sealing_time DOUBLE
Name Type
sealing_time DOUBLE

Agilent Technologies PlateLoc Specifications

General

Brand	Agilent Technologies
Model	PlateLoc
Category	Laboratory Equipment
Language	English