139
Settings and Adjustments
Configure on the device.
4
How to configure Relay Output Schedule integration (daily schedule)
Configure the time at which relay output will be performed, in units of one day. A schedule one year from the
set day can be configured. 12 schedules can be set for each day.
(1) On the Relay Output Settings screen, tap [Relay Output 1 Schedule] or [Relay Output 2 Schedule].
– The Relay Output Schedule screen is displayed. It may take some time for the screen to be displayed.
(2) Tap the day for which to set a schedule.
– The Daily Schedule screen is displayed for the day that was tapped.
(3) Tap [NEW].
*To change a schedule that has already been registered, tap the row to change, and then tap [EDIT].
*To delete a schedule that has already been registered, tap the row to delete, and then tap [DELETE].
*To delete all daily schedules for the displayed day, tap [DELETE ALL].
*Refer to “How to configure Relay Output Schedule integration (weekly schedule) (→page 141)” for
information on changing and deleting schedules registered as "Week" schedules.
– The Set Daily Schedule screen is displayed.
(4) Configure [Start] and [End].
To Next Page
Loading...
Need help?
General
