173
Settings and Adjustments
Configuring the device on a PC
4
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
■ Tone Settings
Ringback Tone Count
[time(s)]
This item lets you define the number of rings for
the calling tone.
• 1 - 20 times
• Infinite: The calling tone
continues to play for the
amount of time set in
"Call Timeout."
Infinite
Call Destination Configure the outgoing call destination group. 01 - 99 -
Priority This item defines the priority of outgoing calls. • Normal
• Priority
• Urgent
Normal
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
Entry Description Settings Default values
Busy Tone Select the tone heard from this station when an
outgoing call is made and the other station is on
a call.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Call Message
• Select from the audio
sources registered in
“Custom Sound
Registry (→page 169)”.
Busy Response
Tone
Entry Description Settings Default values
To Next Page
Loading...
