216
Settings and Adjustments
Configuring the device on a PC
4
■ Tone
Hands-free Receive Configure the receive volume from the built-in
speaker during hands-free calls, monitoring, or
paging. The calling tone volume will be changed
as well.
1 - 10 6
Headset Jack Transmit Configure the transmit volume of the
microphone connected to the pin jack.
1 - 10 10
Headset Jack Receive Configure the receive volume for the speakers
connected to the pin jack.
1 - 10 6
VoIP Phone Volume
Adjustment
Adjust the transmit/receive volume balance
between the station and VoIP Phone.
• -12dB from VoIP,
+12dB to VoIP
• -6dB from VoIP, +6dB
to VoIP
• No Adjustment
• +6dB from VoIP, -6dB
to VoIP
• +12dB from VoIP, -
12dB to VoIP
No Adjustment
Ringtone Configure the ringtone and paging received
pretone volume.
1 - 10 6
Button Feedback Configure whether a tone is heard when
pressing a button on this station's screen.
• Enable
• Disable
Enable
Important
• Configure the paging pretone with a longer duration than the paging pretone of the station receiving the page. Configuring a
shorter tone might prevent audio from playing on the other station when paging starts. Configure the same tone as that of other
IX-MV7-* andIX-MV stations in the system.
Entry Description Settings Default values
To Next Page
Loading...
