Chapter 8: Mixer Functions
Page 136
There are four types of events.
01 STEREO LEVEL
02 STEREO PAN
03 FXsend LEVEL
05 INDIV LEVEL
Pad numbers A01 ~ D16 correspond to 00 ~ 3F.
Value can be set between the range 00 ~ 64.
Setting the Master Level
To adjust the total output level of the MPC2000XL, use the Master Level section.
DRUM 2DRUM 2 DRUM 3DRUM 3 SETUP FXeditDRUM 4DRUM 4DRUM 1DRUM 1
......................................................................
.....................................
.....................................
Mixer setupMixer setup
Stereo mix sourch:PROGRAMStereo mix sourch:PROGRAM
INDIV/FX source:PROGRAMINDIV/FX source:PROGRAM
Copy pgm mix to drum:YESCopy pgm mix to drum:YES
Record mix changes: NORecord mix changes: NO
Master LevelMaster Level
12dB
FX drum
Drum:1
Master Level:
To set the overall level of the MPC2000XL.
The MPC2000XL can generate up to 32 sounds at one time. Therefore, there is a large difference
in the output level when only one or many sounds are generated. If you play a lot of sounds at the
same time, the level may be too high and the sound will be distorted. You can prevent distortion
by lowering the Master Level. If you are not playing a lot of sounds at the same time, increase the
level to cover noise.
FX drum
To select which of the four “DRUM 1 - 4” settings you want to use the effects with.
To Next Page
Loading...
Need help?
General
