Akai MPC 2000XL

Chapter 9: Effects
Page 146
<Pitch Shifter>
Select PITCH SHIFT in the Type: field of Modulation window. This effect produces a shift
in the pitch of the original sound.
........................
......................................................................................................
............................
CLOSE MIXERSOLO BYPASS
MODULATION
Type:PITCH SHIFT Left Right
 Tune:- 0.05 0.05
Tune: This sets the amount of the shift. The effect is processed in stereo and it is necessary to
set both left and right.
<Pitch Shifter and Feedback>
Select PITCH+FEEDBACK in the Type: field of the Modulation window. This effect adds a
delay effect to the pitch shift.
Note: When this is selected, it uses the delay circuit and ignores the DELAY/ECHO effect
described later in this manual.
........................
......................................................................................................
............................
CLOSE MIXERSOLO BYPASS
MODULATION
Type:PITCH+FEEDBACK Left Right
 Tune:- 0.05 0.05
 Delay: 0ms 0ms
 Feedback: 0 0
Tune: This sets the shift amount. The effect is processed in stereo and it is necessary to set
both left and right.
Delay: This sets the delay time between 0 and 335 ms. The effect is processed in stereo and
it is necessary to set both left and right.
Feedback: This sets the feedback volume. The effect is processed in stereo and it is neces-
sary to set both left and right.