Page i
Warning
WARNING: WHEN USING ELECTRIC PRODUCTS, BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
WARNING
The MPC2000XL is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that
your MPC2000XL meets the power requirements in your area. If in doubt, consult a qualified
electrician or AKAI professional dealer.
120 VAC @ 60 Hz for USA and Canada
220~240 VAC @ 50 Hz for Europe
PROTECTING YOURSELF AND THE MPC2000XL
• Never touch the AC plug with wet hands.
• Always disconnect the MPC2000XL from the power supply by pulling on the plug, not the
cord.
• Allow only an AKAI professional dealer or qualified professional engineer to repair or
reassemble the MPC2000XL. Apart from voiding the warranty, unauthorized engineers
might touch live internal parts and receive a serious electrical shock. There are no
serviceable parts inside.
• Do not put, or allow anyone to put any object, especially metal objects, into the
MPC2000XL.
• Use only a household AC power supply. Never use a DC power supply.
• If water or any other liquid is spilled into or onto the MPC2000XL, disconnect the power,
and call your dealer.
• Make sure that the unit is well-ventilated, and away from direct sunlight.
• To avoid damage to internal circuitry, as well as the external finish, keep the MPC2000XL
away from sources of direct heat (stoves, radiators, etc.).
• Avoid using aerosol insecticides, etc. near the MPC2000XL. They may damage the
surface, and may ignite.
• Do not use denaturated alcohol, thinner or similar chemicals to clean the MPC2000XL.
They will damage the finish.
• Modification of this equipment is dangerous, and can result in the functions of the
MPC2000XL being impaired. Never attempt to modify the equipment in any way.
• Make sure that the MPC2000XL is always well-supported when in use (either in a
specially-designed equipment rack, or a firm level surface).
• In order to assure optimum performance of your MPC2000XL, select the setup location
carefully, and make sure the equipment is used properly. Avoid setting up the MPC2000XL
in the following locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
To Next Page
Loading...
Need help?
General
