Akai MPC 3000

Page 96
Chapter 4: Editing Sequence
7. The Duration field (D:
9696
9696
96):
This field shows the note duration in ticks (96 ticks = one
quarter note). The range is 1-9999 ticks.
• The MIDI Note event
>Note: 60(C.3 ) V:127 ^V: 64 D: 96
The fields are:
1. The Note Number field (Note:
60 60
60 60
60(C.3 ):
This is the MIDI note number (0-127) of the note, indicat-
ing the pitch.
2. The Note Name field (Note: 60(
C.3 C.3
C.3 C.3
C.3 )):
This field shows the note name (C-2 to G8) for the note
number shown to the left.
3. The Velocity field (V:
127127
127127
127):
This is the Note On velocity of the note.
4. The Release Velocity field (^V:
64 64
64 64
64):
This is the release velocity of the note.
5. The Duration field (D:
9696
9696
96):
This field shows the note duration in ticks (96 ticks = one
quarter note). The range is 1-9999 ticks.
• The Program Change event
>Program_change Val: 1
The single field, Val, with a range of 1-128, is used to select the
MIDI program number.
• The Pitch Bend event
>Pitch_bend Val:+ 0
The single field, Val, contains the actual numeric value of the pitch
bend event. It is a signed field, with a range from -8192 to 8191.
• The Channel Pressure event
>Channel_pressure Val:127
The single field, Val, has a range of 0-127.