Page 97
Chapter 4: Editing Sequence
• The Poly Pressure event
>Poly_pressure Note: 60(C.3 ) Val:127
There are three fields:
1. The Note Number field (Note:
60 60
60 60
60(C.3 )):
This is the note to which the pressure message applies.
2. The Note Name field (Note: 60<
C.3 C.3
C.3 C.3
C.3 )):
This is the note name for the note number selected at the
left. This is for display only and cannot be edited.
3. The Value field (Val:
127127
127127
127):
This is the pressure value for the selected note number (0
to 127).
• The System-Exclusive event
>System_exc Size: 1 Byte: 1 Val: 0
There are three fields:
1. The Size field:
This displays the total number of data bytes. The maxi-
mum size of a system-exclusive event in the MPC3000 is
999 bytes.
2. The Byte field:
The number of the byte whose contents are currently
displayed in the Val field.
3. The Val field:
The current value of the byte number displayed in the
Byte field.
• The Stereo Volume event
>Stereo_volume Pad:A01 Val:100
This message is exclusive to the MPC3000 and is used to change the
Stereo Mixer Volume setting of a particular sound in mid-sequence.
When the Record Live Changes feature is used (accessed by pressing
MIXER/EFFECTS, then 4), many of these events are recorded into
the active track to simulate a smooth and continuous mixer volume
change. There are two fields:
1. The Pad field:
This field determines which of the 64 pad numbers/mixer
sliders (A01-D16) this message will affect.
2. The Val field:
This field contains the actual mixer slider value (0-100).
To Next Page
Loading...
Need help?
General
