Page 98
Chapter 4: Editing Sequence
• The Stereo Pan event
>Stereo_pan Pad:A01 Val:C
This message is exclusive to the MPC3000 and is used to change the
stereo mixer pan setting of a particular sound in mid-sequence.
When the Record Live Changes feature is used (accessed by pressing
MIXER/EFFECTS, then 4), many of these events are recorded into
the active track to simulate a smooth and continuous mixer pan
change. There are two fields:
1. The Pad field:
This field determines which of the 64 pad numbers/pan
pots (A01-D16) this message will affect.
2. The Val field:
This field contains the actual pan pot value (50L - C -
50R).
• The Output/Effect Volume event
>Output/effect_volume Pad:A01 Val:127
This message is exclusive to the MPC3000 and is used to change the
individual output/effects mixer volume setting of a particular sound
in mid-sequence. When the Record Live Changes feature is used
(accessed by pressing MIXER/EFFECTS, then 4), many of these
events are recorded into the active track to simulate a smooth and
continuous individual output/effects mixer volume change. There
are two fields:
1. The Pad field:
This field determines which of the 64 pad numbers/mixer
sliders (A01-D16) this message affects.
2. The Val field:
This field contains the actual mixer slider value (0-100).
• The Control Change event
>Control:C1-MODULATION WHEEL Val:127
There are two fields:
1. The Control field (Control:
C1-MODULATIONC1-MODULATION
C1-MODULATIONC1-MODULATION
C1-MODULATION
WHEELWHEEL
WHEELWHEEL
WHEEL
):
There are 128 MIDI continuous controllers (0-127), each
with an assigned control function. The control function,
as defined in the MIDI 1.0 Detailed Specification, is
displayed to the right of the selected controller number.
To Next Page
Loading...
Need help?
General
