Akai MPC 3000 User Manual

Page 153
Chapter 8: Creating and Editing Sounds
If you liked it, press <Keep&name> to keep it and go on to a screen
that allows you to name the new sound.
8. The sound must be assigned to a note number within a program
before it can be played by pads, sequences or the MIDI input. To do
this, press the PROGRAM/SOUNDS key and select option 1. Follow
the instructions in the “Creating and Editing Programs” chapter of
this manual.
9. It is a good idea to save your sound to disk now. IF YOU DON’T,
THE SOUND WILL BE LOST WHEN YOU TURN THE POWER
OFF! To save your sample to disk, follow the instructions in the
“Saving to and Loading from Disk” chapter of this manual for saving
a single sound to disk.

Akai MPC 3000 Specifications

General

Polyphony	32 voices
Sampling Rate	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB (expandable to 16MB)
Pads	16 velocity and pressure sensitive pads
Sequencer	Yes
Sequencer Resolution	96 PPQ
Storage	3.5" floppy disk drive
MIDI	In, Out, Thru
Display	LCD
Outputs	stereo output
Inputs	2 x 1/4" inputs