Akai MPC 3000

Page 160
Chapter 8: Creating and Editing Sounds
1. DELETE SOUND:
The entire stereo sound will be deleted.
2. DELETE LEFT SIDE (CONVERT MONO):
The stereo sound will be converted to mono by deleting
only the left side.
3. DELETE RIGHT SIDE (CONVERT MONO):
The stereo sound will be converted to mono by deleting
only the right side.
Pressing <Do it> performs the selected function on the sound.
Pressing <Del ALL SNDS!>, on either the mono or the stereo
screen, causes the screen to change to the following:
==== DELETE ALL SOUNDS FROM MEMORY =====
ARE YOU SURE YOU WANT TO DELETE ALL
SOUNDS FROM MEMORY?
========================================
<DELETE ALL!>
Pressing <DELETE ALL!> will delete all sounds fromb memory.