Akai MPC 3000 User Manual

Page 228
Appendix
(Auto Punch screen)
all settings
(Initialize Sequence screen)
all settings
(Erase screen)
all settings
(Sample New Sound screen)
Input (analog or digital)
Mode (stereo, mono-left or mono-right)
Monitor setting (on/off)
Record length
Record threshold
Pre-record time
(Copy Events screen)
Mode select (merge or replace)
(Edit Velocity/Duration screen)
Edit Velocity Or Duration select
Edit Action select (add, subtract, multiply or replace)
Value
(Simul Sequence screen)
Sequence number
(Hard Disk Format screen)
Disk Type select (normal or Syquest)
(Load MPC60 SEQ, ALL, SET or ST1 screens)
Conversion table (converts “drum” assignments to note numbers)
(All screens with two or more editable fields)
Cursor position (field number) within screen

Akai MPC 3000 Specifications

General

Polyphony	32 voices
Sampling Rate	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB (expandable to 16MB)
Pads	16 velocity and pressure sensitive pads
Sequencer	Yes
Sequencer Resolution	96 PPQ
Storage	3.5" floppy disk drive
MIDI	In, Out, Thru
Display	LCD
Outputs	stereo output
Inputs	2 x 1/4" inputs