Page 227
Appendix
The PAR (system parameters) file
(Play/Record screen)
For each of the 64 MIDI output channel/port combinations:
• MIDI channel name
(16 Levels screen)
Parameter select for 16 levels (velocity or note variation)
(Tempo screen)
Master tempo
Tempo display mode (BPM or FPB)
Frames per second (24, 25, 29.97 drop or 30)
Tempo source (master or sequence)
Tap averaging count (2, 3 or 4 taps)
(Sync screen)
Sync input source (MIDI clock, MTC, SMPTE, FSK or 1/4 notes)
MIDI input used for receiving sync
MIDI clock sync: song pointer enable/disable
Shift Sync Early field (number of milliseconds)
1/4-note sync start (Bar 1 or This Bar)
Sync input enable/disable
MIDI clock output assignment
(Timing Correct screen)
Timing correct note value, swing, shift direction and amount
(Step Edit Options screen)
Event to insert
Auto Step Increment On Key Release setting (on/off)
Duration of recorded notes (as played, same as step)
Function of soft keys 1 and 2 (insert/delete or paste/cut)
Function of rewind & fast forward keys (next event or next step)
Step Edit Display Filter settings
(MIDI Routing screen)
Active track receive channel
Local Mode setting (on/off)
Soft Thru setting (on/off)
Controller assignment for Note Variation Slider
Convert Sustain Pedal To Duration setting (on/off)
(MIDI Input Filter screen)
Sound Generator Input Filter settings
Sequencer Input Filter settings
(OTHER screen)
Metronome volume, output select and rate
Metronome In Play setting (on/off)
Count In mode (record only, normal)
Foot Switch assignments (2)
To Next Page
Loading...
Need help?
General
