17
MPC500 Operator's Manual rev 1.0
The 'Value' field for 'Notes' consists of two parts, Low note and High note. Low note (left) sets lower range of MIDI note and High note
(right) sets high range of MIDI note. In this page, you can set note range with an external MIDI keyboard. The range is updated whenever a
MIDI note is received.
For example, when the MPC500 receives only one note, such as C 3, the range is set as C 3-C 3. When MPC500 receive multiple notes, for
example C 3, D 3 and E 3, then the range is set to C 3-E 3.
4. Once you have selected the pads or notes you wish to delete, press the [DO IT] button.
Erase can also be used to delete events from tracks other than the currently selected track, or to delete only specific types of events. You can
also specify only a certain time range from which to delete events.
Choosing Tracks
1. Select the 'Parameter' field, which will be displayed as either Pads or Notes, and turn the [DATA] wheel. The Track
selection will be displayed:
Here, you can select which track you wish to delete events from. Default is the currently selected track in the MAIN TRACK page. To the
right of the track will be an indication of the type of track - MIDI (M) or Drum (D). You can select a different track with the [DATA]
wheel, or hitting the pad that corresponds to the desired track number.
2. Select events as per the previous example. Once you have selected the pads or notes you wish to delete, press the
[DO IT] button.
Choosing Specific Events
1. Select the 'Parameter' field again, and scroll with the [DATA] wheel. The Type selection will be displayed. This
selection lets you specify which types of events are deleted.
The following selections are available:
ALL All events are erased.
Note Only note/pad events are erased. Other events are not erased.
PB Only Pitch Bend events are erased.
CC Only Control Change events are erased. All control change events or individual
controller numbers can be selected.
PC Only Program Change events are erased.
CP Only Channel Pressure is erased.
PP Only poly pressure evens are deleted. A note range for poly pressure events can
also be displayed.
EX Only system exclusive data is erased.
2. Once you have selected the events you wish to delete, press the [DO IT] button.
Selecting a Specific Time Range
3. Select the 'Parameter' field and turn the [DATA] wheel until the 'In' parameter is displayed:
To Next Page
Loading...
Need help?
General
