Test Management
279
There is also a Reset to factory defaults control in the system menu that enables to
recover de default configuration in the test unit. Please, note that the settings from the
System menu, including network settings, clock settings and others, are not restored
with this control.
This section supplies a description of the General settings menu and System
information menu. To learn how to configure and use the network interface or how to
install licenses for new software options go to the sections specifically dedicated to
these topics.
11.4.1.Using the Network
The platform network interfaces are currently user for three different purposes:
SNMP This menu contains the controls necessary to enable and
configure SNMP in units compatible with this protocol. The
items contained in this menu are:
• Enable: Enables or disables the SNMP server in the unit. If
this setting is configured to On, the SNMP server is ena-
bled and it responds to SNMP requests. If Enable is con-
figured to Off, then the unit ignores SNMP requests.
• Read community: Community name used for read opera-
tions. Write operations based on the read community
name will fail. The default read community is public.
• Write community: Community name used for write opera-
tions. The write community can be used for read opera-
tions as well. The default write community is private.
Table 11.4: System information panel
Setting Description
Model Name Shows the test unit model name: xGenius.
Serial number Displays the test unit serial number. It is a 8 character alpha-
numeric string
Software version Displays the current software release.
Hardware version Displays the current hardware release.
PM release Displays the current power management release.
Firmware versions Displays the current firmware release.
Table 11.3: General Settings Panel
Setting Description
To Next Page