Alcatel-Lucent 7210 SAS-D - Page 106

Page 106 7210 SAS D, E, K OS Basic System Configuration Guide
File Commands
repair
Syntax repair [cflash-id]
Context file
Description This command checks a compact flash device for errors and repairs any errors found.
Parameters cflash-id — Specify the compact flash slot ID to be shut down or enabled. When a specific cflash-id
is specified, then that drive is shutdown. If no cflash-id is specified, the drive referred to by the cur-
rent working directory is assumed.
Default The current compact flash device.
Values cf1:|uf1: - 7210 SAS-E
cf1: - 7210 SAS-D
cf1:|uf1: - 7210 SAS-K
scp
Syntax scp local-file-url destination-file-url [router router-instance] [force]
Context file
Description This command copies a local file to a remote host file system. It uses ssh for data transfer, and uses
the same authentication and provides the same security as ssh. The following prompt appears:
“Are you sure (y/n)?” The destination must specify a user and a host.
Parameters local-file-url — The local source file or directory.
[cflash-id/][file-path]> - [Up to 256 characters]
cflash-id or usb-flash-id -
cf1: - 7210 SAS-D
cf1: | uf1: - 7210 SAS-E
cf1: | uf1: - 7210 SAS-K
destination-file-url — The destination file.
user — The SSH user.
host — The remote host IP address of DNS name.
file-path — The destination path.
router-instance — Specify the router name or service ID.
Values <user>@<hostname>:<file-path> - [255 chars max]
user - [32 chars max]