Alcatel-Lucent 7210 SAS-D User Manual

Boot Option Files
7210 SAS D, E, K OS Basic System Configuration Guide Page 129
Or CTRL-D to exit the prompt
Password:
Incorrect password
Password:
Incorrect password
Password:
Incorrect password
Authentication failed, Do you want to reset password?(yes/no)
*******************************************************************
On reset,the node's flash contents will be set to factory defaults.
All files on the flash will be removed. If present, files
cf1:/boot.tim and cf1:/both.tim are not removed.
Please ensure that you have a backup of the required
files before you proceed.
*******************************************************************
'yes' or 'no' ?
'yes' or 'no' ? yes
********************************************
*** Chassis must not be powered off nor ***
*** cards removed while password reset ***
*** is in progress ***
********************************************
Password reset complete. Restarting...
At this point the password has been reset and the node is rebooted to boot up with factory default
settings.
Resetting...OK
ø
Alcatel-Lucent 7210 Boot ROM. Copyright 2009-2011 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Running POST tests from ROM
Testing ROM load area...done
Relocating code...Jumping to RAM
Performing second stage RAM test....passed
Board Serial Number is 'NS1023C1436'
Bootlog started for Version 9-V-0.0.I1111
Build V-0.0.I1111 bootrom/mpc 7xxx
Built on Wed Jun 29 21:55:30 IST 2011 by builder in /builder/0.0/panos/main
?Attempting to load from file cf1:/boot.tim
Version L-4.0.beta-private, Sat Aug 20 12:59:26 IST 2011 by abc /abc/ws-40b/panos/main
text:(3706043-->13139264) + data:(528557-->2068192)
Starting at 0xb000000...

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English