Alcatel-Lucent 7210 SAS-D - Page 166

File Management Commands
Page 166 7210 SAS D, E, K OS Basic System Configuration
uplinkA-route
Syntax [no] uplinkA-route ip-address/mask next-hop ip-address
Context bof
Description This command configures an uplink-A static route.
Parameters ip-address — The IP address of the Boot Option File (BOF). This address must be unique within the
subnet and specified in dotted decimal notation.
Values a.b.c.d
mask — The subnet mask length when the IP prefix is specified in CIDR notation. When the IP prefix
is specified in CIDR notation, a forward slash (/) separates the ip-addr from the mask-length
parameter. The mask length parameter indicates the number of bits used for the network portion
of the IP address; the remainder of the IP address is used to determine the host portion of the IP
address.
Values 0 — 32
next-hop ip-address — The next hop IP address used to reach the destination.
uplinkB-route
Syntax [no] uplinkB-route ip-address/mask next-hop ip-address
Context bof
Description This command configures an uplink-B static route.
Parameters ip-address — The IP address of the Boot Option File (BOF). This address must be unique within the
subnet and specified in dotted decimal notation.
Values a.b.c.d
mask — The subnet mask length when the IP prefix is specified in CIDR notation. When the IP prefix
is specified in CIDR notation, a forward slash (/) separates the ip-addr from the mask-length
parameter. The mask length parameter indicates the number of bits used for the network portion
of the IP address; the remainder of the IP address is used to determine the host portion of the IP
address.
Values 0 — 32
next-hop ip-address — The next hop IP address used to reach the destination.