File Management Commands
Page 170 7210 SAS D, E, K OS Basic System Configuration
The destination address of the static route in dotted decimal notation.
eth-mgmt-speed
Note: This command is not supported on 7210 SAS-D and 7210 SAS-K devices.
Syntax eth-mgmt-speed speed
Context bof
Description Platforms Supported: 7210 SAS-E.
This command configures the speed for the management Ethernet port when Auto-negotiation is
disabled in the running configuration and the Boot Option File (BOF).
If the port is configured to Auto-negotiate, this parameter is ignored.
Default speed 100 — 100 M/bps operation.
Parameters 10 — Sets the link to 10 M/bps speed.
100 — Sets the link to 100 M/bps speed.
To Next Page
Loading...
