Alcatel-Lucent 7210 SAS-D User Manual

System Information Commands
Page 298 7210 SAS D, E, K OS Basic System Configuration
Guide
System Information Commands
boot-bad-exec
Syntax boot-bad-exec file-url
no boot-bad-exec
Context config>system
Description Use this command to configure a URL for a CLI script to exec following a failure of a boot-up
configuration. The command specifies a URL for the CLI scripts to be run following the completion
of the boot-up configuration. A URL must be specified or no action is taken.
The commands are persistent between router (re)boots and are included in the configuration saves
(admin>save).
Default no boot-bad-exec
Parameters file-url — Specifies the location and name of the CLI script file executed following failure of the
boot-up configuration file execution. When this parameter is not specified, no CLI script file is
executed.
Values file url: local-url | remote-url: 255 chars max
local-url: [<cflash-id/> | <usb-flash-id>][file-path]
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address ]
ipv4-address a.b.c.d
cflash-id: cf1:
usb-flash-id uf1:
Related
Commands
exec command on page 51 — This command executes the contents of a text file as if they were CLI
commands entered at the console.
boot-good-exec
Syntax boot-good-exec file-url
no boot-good-exec
Context config>system
Description Use this command to configure a URL for a CLI script to exec following the success of a boot-up
configuration.
Default no boot-good-exec
Parameters file-url — Specifies the location and name of the file executed following successful completion of the
boot-up configuration file execution. When this parameter is not specified, no CLI script file is
executed.

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English