Alcatel-Lucent 7210 SAS-D User Manual

System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 299
Values file url: local-url | remote-url: 255 chars max
local-url: [<cflash-id/> | <usb-flash-id>][file-path]
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address ]
ipv4-address a.b.c.d
cflash-id: cf1:
usb-flash-id uf1:
Related
Commands
exec command on page 51 — This command executes the contents of a text file as if they were CLI
commands entered at the console.
chassis
Syntax chassis
Context config>system
Description This command
clli-code
Syntax clli-code clli-code
no clli-code
Context config>system
Description This command creates a Common Language Location Identifier (CLLI) code string for the router. A
CLLI code is an 11-character standardized geographic identifier that uniquely identifies geographic
locations and certain functional categories of equipment unique to the telecommunications industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are
performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of the command removes the CLLI code.
Default none — No CLLI codes are configured.
Parameters clli-code — The 11 character string CLLI code. Any printable, seven bit ASCII characters can be
used within the string. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes. If more than 11 characters are entered, the string is
truncated. If less than 11 characters are entered the string is padded with spaces.
config-backup

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English