Alcatel-Lucent 7210 SAS-D User Manual

System Information Commands
Page 300 7210 SAS D, E, K OS Basic System Configuration
Guide
Syntax config-backup count
no config-backup
Context config>system
Description This command configures the maximum number of backup versions maintained for configuration
files and BOF.
For example, assume the config-backup count is set to 5 and the configuration file is called xyz.cfg.
When a save command is executed, the file xyz.cfg is saved with a .1 extension. Each subsequent
config-backup command increments the numeric extension until the maximum count is reached.
xyz.cfg
xyz.cfg.1
xyz.cfg.2
xyz.cfg.3
xyz.cfg.4
xyz.cfg.5
xyz.ndx
Each persistent index file is updated at the same time as the associated configuration file. When the
index file is updated, then the save is performed to xyz.cfg and the index file is created as xyz.ndx.
Synchronization between the active and standby is performed for all configurations and their
associated persistent index files.
The no form of the command returns the configuration to the default value.
Default 5
Parameters count — The maximum number of backup revisions.
Values 1 — 9
console
Syntax console
Context config>system
Description Provides the context to configure console as an alarm-input-pin.
use-console-alarm-input
Syntax [no] use-console-alarm-input
Context config>system>console
Description Platforms Supported: 7210 SAS-D and 7210 SAS-K.
This command provides an option to the user to use the console port on the 7210 SAS-D/K as an
alarm-input pin. When this command is executed, the console port can be used as an alarm input pin.

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English