Date and Time Commands
Page 356 7210 SAS D, E, K OS Basic System Configuration
Guide
Time of Day Commands
tod-suite
Syntax [no] tod-suite tod-suite name create
Context config>cron
Description This command creates the tod-suite context.
Default no tod-suite
egress
Syntax egress
Context config>cron>tod-suite
Description This command enables the TOD suite egress parameters.
ingress
Syntax ingress
Context config>cron>tod-suite
Description This command enables the TOD suite ingress parameters.
filter
Syntax filter ip ip-filter-id [time-range time-range-name] [priority priority]
filter mac mac-filter-id [time-range time-range-name] [priority priority]
filter ipv6 ipv6-filter-id [time-range time-range-name] [priority priority]
no ip ip-filter-id [time-range time-range-name]
no ipv6 ipv6-filter-id [time-range time-range-name]
no filter mac mac-filter-id [time-range time-range-name]
Context config>cron>tod-suite>egress
config>cron>tod-suite>ingress
Description This command creates time-range based associations of previously created filter policies. Multiple
policies may be included and each must be assigned a different priority; in case time-ranges overlap,
the priority will be used to determine the prevailing policy. Only a single reference to a policy may be
included without a time-range.
To Next Page
Loading...
