System Resource-Profile Commands
Page 388 7210 SAS D, E, K OS Basic System Configuration
Guide
The resources cannot be shared with any other egress filter policies that specify other match criteria.
Please see the 7210 SAS Router Configuration guide for more information on resource allocation
details and fields available for use.
With the no form of the command, the software does not allocate any resources for use by egress filter
policies using MAC or IPv4 criteria. If no resources are allocated for use, then the software fails all
attempts to associate a service entity (For example: SAP, IP interface, and others.) with a filter policy
using this match criteria.
Default mac-ipv4-match-enable 2 (to maintain backward compatibility with earlier releases)
Parameters num-resources — Specifies the maximum amount of resources for use by this filter match criteria.
Values [0|2]
Default 0
mac-ipv6-64bit-match-enable
Syntax [no] mac-ipv6-64bit-match-enable num-resources
Context configure>system>resource-profile>egress-internal-tcam>acl-sap-egress
Description This command allows the user to allocate maximum resources for use by egress filter policies using
MAC criteria or IPv6 criteria using only the upper 64-bits of the IPv6 addresses. The resources
allocated are allocated on a first-cum-first-serve basis among service entities (For example: SAP, IP
interface, and more) using IPv6 64-bit and MAC criteria egress filter policies.
The resources cannot be shared with any other egress filter policies that specify other match criteria.
Please see the 7210 SAS Router Configuration guide for more information on resource allocation
details and fields available for use.
With the no form of the command, the software does not allocate any resources for use by egress filter
policies using MAC or IPv6 64-bit criteria. If no resources are allocated for use, then the software
fails all attempts to associate a service entity (e.g. SAP, IP interface, etc.) with a filter policy using
this match criteria.
Default no mac-ipv6-64bit-match-enable
Parameters num-resources — Specifies the maximum amount of resources for use by this filter match criteria.
Values [0|2]
mac-match-enable
Syntax [no] mac-match-enable
Context configure> system> resource-profile> egress-internal-tcam> acl-sap-egress
Description This command allows the user to allocate maximum resources for use by egress filter policies using
MAC criteria. The resources allocated are allocated on a first-cum-first-serve basis among service
entities (For example: SAP, IP interface, etc.) using MAC criteria egress filter policies. This option
To Next Page
Loading...
Need help?
General
