Alcatel-Lucent 7210 SAS-D User Manual

System Resource-Profile Commands
Page 390 7210 SAS D, E, K OS Basic System Configuration
Guide
Values
ipv4-ipv6-128-match-enable
Syntax [no] ipv4-ipv6-128-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Description This command allows the user to allocate maximum resources for use by ingress filter policies using
ipv6 criteria with 128-bit IPv6 addresses.
The resources can be shared with IPv4 ingress filter policies. Please see the 7210 SAS Router
Configuration guide for more information on how to allow filter policies using IPv4 criteria to share
resources with filter policies that use IPv6 criteria with 128-bit address and resource allocation details
and fields available for use.
With the no form of the command, the software does not allocate any resources for use by ingress
filter policies using ipv6 criteria with 128-bit IPv6 addresses. If no resources are allocated for use,
then the software fails all attempts to associate a service entity (For example: SAP, IP interface, etc.)
with a ingress filter policy using this match criteria.
Parameters num-resources — Specifies the maximum amount of resources for use by this filter match criteria.
Values
max — It is a special keyword. If user specifies max, then the software allocates one chunk when the
first SAP is associated with a ingress filter policy using this match criteria. It continues to allocate
resources to the service entity associated with a ingress filter policy using this criteria, as long as the
total amount of resources allocated does not exceed the resources allocated to ingress filter policies
(configured with the command config> system> resource-profile> ingress-internal-tcam> acl-sap-
ingress command) and chunks are available for use.
Platforms Min value
(per node)
Max value
(per node)
Default Values
7210 SAS-D (per node) 0 3 2
7210 SAS-E
(per node)
05max
7210 SAS-K (per node) 0 5 1
Platforms Min value
(per node)
Max value
(per node)
Default
Values
7210 SAS-D (per node) 0 3 0
7210 SAS-E
(per node)
0110

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English